Loading
PRYMER SF 1105

Buy PRYMER SF 1105
directly from the manufacturer

To calculate the product cost add the product to the shopping cart using the button “Send an inquiry”. One of our consultants will contact you as soon as possible to go over the details and give you the end price.

  • Description

Description

Two-component water-based epoxy primer for restoring dusty subfloors. When applying two layers it works as a moisture barrier.

Characteristics: 

  • mixture ratio: 1:1;
  • application temperature: +10°C ÷ +25°C;
  • application: roller 8 mm / brush;
  • thinning (if necessary): water;
  • coverage: 150-500 g/m² depending on the foundation and use;
  • total dry time: 24-36 h; 
  • pot-Life: ca. 1 h (at 20°C and 65% R.H.); 
  • storage stability: 1 year (in original sealed containers at temperatures between +10°C and +25°C);
  • packaging: 20 Kg (10+10) - 10 Kg (5+5);
  • tool cleaning: water.

How to use 

Restoration of dusty subfloors 

Clean the foundation to be treated by eliminating totally any trace of oil, grease, wax, or paint spots. The subfloor must be free from cracks. Mix component A and B (ratio 1:1) manually or with electric tools, without creating excessive foam. When necessary, dilute with 10% of water before use. Apply 150 g/m² by roller. In case of subfloors with low absorption, dilute with higher quantities of water (up to 20%).

Moisture barrier

Clean the foundation to be treated by eliminating totally any trace of oil, grease, wax, or paint spots. The subfloor must be free from cracks. Mix component A and B (ratio 1:1) manually or with electric tools, without creating excessive foam. Apply 200g/m2 by roller. After curing (6 hours), apply a 2nd coat (200 g/m²). In case of subfloors with low absorption, PRYMER SF 1105 could create a superficial film. Spread some quartz (diameter 0,6 mm) on to the wet surface after the 2nd hand. The excess of quartz will be removed with a broom. We advise to use the following adhesives: UNISIL, ADESIVER ELASTIC, ADESIVER 501 EP, ADESIVER HERCULES, ADESIVER 327.

The total quantity of PRYMER SF 1105 to ensure the correct creation of a moisture barrier is at least of 400 g/m². The residual humidity allowed during the installation of a wooden floor is 5% in a 6cm thick substrate.

In case of powdery subfloors, the first coat as anti-dust has to be considered separately from the total quantity of 400 g/m² for moisture barrier.

PRODUCT ADDED TO CART
PRYMER SF 1105
м²