One-component solvent-based joint and hole filler that is mixed with sanding dust from the floor. It is used for surface levelling and filling gaps between flooring elements. It is suitable for any wood species.

Characteristics:

• mixture ratio: single-component;
• application temperature: +10°C ÷ +25°C;
• application: smooth trowel;
• thinning (if necessary): DNS 18 thinner;
• sandpapering: 20-30 min (at 20°C and 65% R.H.);
• storage stability: 1 year (in original sealed containers at temperatures between +10°C and +25°C);
• packaging: 5 lt and  1 lt; 
• tool cleaning: DNE thinner.

How to use 

After having sanded the wood floor with 30 or 60-grit abrasive paper, apply using a smooth trowel POLIFILM TP 10 mixed with the wood dust of the previous sanding with 100 grit abrasive paper. After finishing the smoothing, sandpaper with 80-grit abrasive paper and proceed with the following steps of sandpapering. If the floor has too many cracks, you must smooth it also after the 100-grit abrasive paper (always mixing TP 10 with wood dust from previous sanding with 100 grit abrasive paper).