Loading
ADESIVER 501 EP

Buy ADESIVER 501 EP
directly from the manufacturer

To calculate the product cost add the product to the shopping cart using the button “Send an inquiry”. One of our consultants will contact you as soon as possible to go over the details and give you the end price.

  • Description

Description

ADESIVER 501 EP is an odorless, free of solvents and water two-component epoxy-polyurethane adhesive. Suitable to lay all kinds of wood and in any size including strips, without requiring the pre-laying of wood joists and with previous suitable treatment onto not absorbing preexisting subfloors (ceramics, tiles, marble, palladian, gres, etc). Suitable for gluing onto heated subfloors.

Characteristics: 

  • mixture ratio: 9:1;
  • application temperature: +10°C ÷ +25°C;
  • application: notched trowel n. 5;
  • pot-Life: 2 h (at 20°C and 65% R.H.);
  • hardening: 36-48 h (at 20°C and 65% R.H.);
  • coverage: 1200-1800 g/m² depending on the subfloor;
  • colour: oak, walnut;
  • storage stability: 1 year (in original sealed containers at temperatures between +10°C and +25°C);
  • packaging: 10 kg (9+1) and 5 kg (4,5+0,5);
  • tool cleaning: DILUENTE DS (before the hardening of the adhesive).

Laying conditions

Subfloor
dry, clean, no-dust creating, not too rough.
Humidity of subfloor
2,0% max with cement subfloors
1,7% max with radiant heating subfloors 0,5% max with anhydrite subfloors
0,2% max with radiant heating anhydrite subfloors
Wood humidity
9%±2

Other uses:

  • adhering of heat and sound insulating panels (cork, expanded polyurethane, rock-wool);
  • adhering of tiles on asbestos cement and chipboards;
  • adhering of wood and building materials (ceramics, stoneware- marble tiles) on to metal bases.

How to use 

After mixing the two components, spread ADESIVER 501 EP with a notched trowel uniformly on a clean subfloor embodying possible dust present on it. Proceed with the laying ensuring that the wood tiles are put together properly and gently hammered so as
to make the adhesive adhere well to the whole surface. Perfect adhesion to the subfloor is ensured if at least 65% of each wooden component is in direct contact with the adhesive.
In presence of dust-creating and porous subfloors, we recommend to apply first one coat of PRYMER  A,  PRYMER PUB 77, PRYMER SF 1105, PRYMER FAST 500 or PRYMER 100 (see technical data sheets). After the complete drying of the treatment proceed with the application of the adhesive.

In presence of humid subfloors, we recommend to apply first PRYMER PUB 77, PRYMER FAST 500, PRYMER SF 1105, PRYMER 100, PRYMER EPOX WETT or PRYMER WB 328 S (see technical data sheets). We do not recommend to dip the heads of the tiles into the ADESIVER 501 EP while laying them. If need be, dip the heads of the tiles into a vynilic (PARKETTKOLL) adhesive which has a very strong wood to wood adhesion avoiding also the typical "skidding" of the tiles.

If the wooden floor is to be laid on glassy surfaces (ceramic tiles, enamelled tiles, polished marble, etc.), remove and clean the surface from dust, grit, glue and waxes. Apply by cloth    the adhesion promoter DILUENTE APA following the correct application time (see technical data sheet), than apply ADESIVER 501 EP. The subsequent sanding can be operated after 3-4 days according to the atmospheric and the wooden floor's hygrometric conditions.

In case of anhydrite subfloors, thoroughly sand using 24 or 36 grit sandpaper; remove dust and apply primer using PRYMER SF 1105 (do not dilute) or PRYMER PUB 77 with DILUENTE DMC 50 thinner at a ratio 70:30. Apply ADESIVER 501 EP and the next sanding should take place after 3-4 days, depending on the atmospheric conditions and humidity level of the wood species used.

When laying down pre-lacquered wooden floors, if a wood piece gets accidentally dirty with glue, clean immediately with DILUENTE PULIPAR or PULIPAR W (see technical data sheets). We recommend, while using ADESIVER 501 EP, to use all the personal prevention systems.



PRODUCT ADDED TO CART
ADESIVER 501 EP
м²