Parquet chemistry "Chimiver"
Single-component prepolymer based adhesive with a silanic termination (MS technology), totally free from water, solvents, amines, tin, isocyanates and epoxy resins. It hardens with atmospheric humidity and becomes resistant to water, temperature and ageing in approx 36-48 hours.
POLIFILM TP 10
One-component solvent-based joint and hole filler that is mixed with sanding dust from the floor. It is used for surface levelling and filling gaps between flooring elements. It is suitable for any wood species.
One-component water-based polyurethane primer with short drying time (the second coat of ECORAPID 1H can be applied without sanding in less than 2 hours after applying the first coat or later after sanding). It does not stain the wood.
One-component water-based polyurethane-acrylate lacquer with a high solid content and short drying time. Next coats can be applied 2-4 hours after applying the first coat, in this case sanding is unnecessary. If next coats of ECOSTAR are applied more than 4 hours after the first coat the sanding is necessary.
Two-component water-based polyurethane lacquer with good levelling and flowing, hardness, chemical and mechanical resistance. Next coats of ECOSTAR 2K can be applied 2-4 hours after applying the first coat, in this case sanding is unnecessary.